Lightweight Beach Chair

1. Unwrap the chair and reveal the supports, then open out the supports so that they're fixed together as one.

2. Pop the supports into the connecting sections on the chair's uprights. This bit can be tricky, and sometimes takes a little force - this ensures the chair's stability.

Done! It's as easy as 1 - 2 - Well, that's it...

Portable Beach Canopy

1. Unpack the canopy and spread it out fully on the ground, filling the corner sandbags with plenty of sand.

2. Make sure the canopy is pulled out nice and tight on the floor - this tightness will ensure the canopy remains stable once it's up.

3. Assemble the poles and place them upright into the corners of the canopy, and firmly into the ground. This will create good tension on the canopy, which keeps it sturdy in the wind. Ensure that the poles are firmly in the ground.

TIP! Once you have a couple of the poles in, it becomes easier to re-adjust the others into a more stable position.

4. Attach the bungees over the poles to secure the canopy. Make sure that they're pulled nice and tight.

And that's it! Time to sit back and relax!

Inflatable Lounger

1. Open only one side of the lounger and turn it towards the wind to inflate.

TIP! If there's no wind, scoop the mouth of the lounger in an upwards motion to catch air. It's super important that once you've grabbed some air you instantly close the lounger's mouth! If it's open even for a little bit, the air will come right out again.

2. Continue to repeat step 1, capturing a little more air each time, until you have a good amount in the lounger. It does not have to completely full of air at this point.

3. Roll the end of the lounger several times to seal the air - this is where you'll build the air pressure in the lounger and it will appear much more full.

4. Fasten the buckle to ensure the lounger stays closed.

Warning: Once you sit on these loungers, you really won't want to get up!

If you have any issues at all, please do get in touch!